SpeedDome® Ultra Outdoor Housing

The SpeedDome® Ultra outdoor housing allows SpeedDome Ultra programmable dome cameras to be installed in virtually any environment. The housing has been designed to provide maximum protection to the internal camera in various weather conditions. In extreme temperatures, the housing’s built-in thermostatically controlled heater and blower prevent excessive ice from forming on the outside bubble. In addition, you can manually activate a defog and defrost mode and even view the housing temperature and humidity. The housing is constructed with a reinforced fiberglass high impact polycarbonate material along with a UV stabilized sun shade, trim ring and top cover. The bubble assembly is affixed to the top via tamper-proof screws. For applications where vandalism is a concern, a vandal resistant model is available which includes an aluminum sunshield cover and a high impact bubble which meets ANSI-87.1 impact safety standards. For additional protection a stainless steel bubble cage is also provided.

SpeedDome Ultra programmable dome cameras are easy to install. Simply plug in the video cable, connect power and data, and the installation is complete. Power and communications LEDs provide diagnostics, confirm proper connections and aid in troubleshooting. Presets, patterns and other parameters are stored in the housing’s I/O board so if a dome has to be replaced the programming is automatically downloaded to the new dome. The housing is equipped with four alarm inputs and one alarm output and surge protection is provided to all video and external lines. The housing is available with your choice of a clear or smoked bubble and a variety of mounts make it easy for you to install it in nearly any application. An optional end cap assembly is ideal for cable interconnection and with the use of third party fiber optic interfaces.

• Reinforced high impact design with vandal resistant option
• Stores presets and patterns within the base to eliminate reprogramming
• Four alarm inputs, one output
• Temperature-controlled interior environment
• Automatic defog and defrost heater cycle modes with manual heater on/off control
• On-demand menu displays housing temperature and humidity
• Thermostatically controlled heater and blower prevent excessive buildup of ice and removes any that does accumulate in one hour
• Meets IP66/NEMA 4 specifications
• Includes four tamper-proof screws and driver bit
• Surge and lightning protection of video, communications, alarm input and output, and power
• Plug and play connectors enable easy servicing of I/O board
  
• Internal LEDs and switches verify proper power and communication status
• Integrated Unshielded Twisted Pair (UTP) simplifies wiring and installation
• J-Boxes available to facilitate wiring of housing and dome
• Ceiling, pole, roof, wall and corner mounts available